Filtereinsatz für HopStrainer altes Modell 100mesh

BeschreibungMilchrohr Dichtungen werden verwendet, um Kegel und Gewinde abzudichten. Hierzu wird die Dichtung in den Gewindestutzen eingelegt, der Kegel dagegengedrückt und das Ganze mit der Nutmutter angezogen. Somit ist das System gegen äußere Einwirkungen gesichert und zudem dicht.Technische DetailsMaterial: Silikon (VMQ), blauNormung: DIN 11851Temperaturbereich: -15 bis +200°CAnwendungsbereichBrauereienPharmaindustrieAnlagenbauLebensmittelindustrieGrößendetailsNennweite[DN]Ø Innen[mm]Ø Außen[mm]DN202333DN253040DN323646DN404252DN505464

BeschreibungDie Ersatzdichtung ist für die Filterkerze des Hopstrainers mit Spaltsieb. Die Dichtung kommt oben und unten an die Filterkerze und ermöglicht somit ein Abdichten und die Trennung vom gefilterter und ungefilterter Flüssigkeit.Technische DetailsMaterial: Silikon, blauLieferumfang: 1 Stück DichtungAnwendungsbereichBrauereienPharmaindustrieAnlagenbauLebensmittelindustrie

DescriptionThis filter mesh serves as a replacement mesh for the angle hopstrainer (item no.: 1035) Technical details Material: Stainless Steel AISI304, 1.4301Usage Brewery Pharmaceutical industry Mechanical engineering Food industrySize details Mesh[mesh] Mesh[µm] Mesh[mm] 1001490,1491501120,112200740,074300490,049400370,037

-Material: siliconsize[INCH]flange[mm]inner diameter[mm]1.0"50,522,101.5"50,534,82.0"6447,53.0"9172,96.0"167146,86     

DescriptionThis filter mesh serves as a replacement mesh for the standard hopstrainer (item no.: 1020) ➜ The use of this article is only for hopstrainers that were bought bevor 2020/01/01.➜ There is another filter mesh for hopstrainers that were bought after 2020/01/01 (item no.: 1041).Technical details Material: Stainless Steel AISI304, 1.4301Usage Brewery Pharmaceutical industry Mechanical engineering Food industrySize details Mesh[mesh] Mesh[µm] Mesh[mm] 1001490,1491501120,112200740,074300490,049400370,037

DescriptionThis filter mesh serves as a replacement mesh for the standard hopstrainer (item no.: 1020) ➜ The use of this article is only for hopstrainers that were bought after 2020/01/01.➜ There is another filter mesh for hopstrainers that were bought bevor 2020/01/01 (item no.: 1021).Technical details Material: Stainless Steel AISI304, 1.4301Usage Brewery Pharmaceutical industry Mechanical engineering Food industrySize details Mesh[mesh] Mesh[µm] Mesh[mm] 1001490,1491501120,112200740,074300490,049400370,037

DescriptionThis filter mesh serves as a replacement mesh for the standard hopstrainer (item no.: 1020) ➜ The use of this article is only for hopstrainers that were bought bevor 2020/01/01.➜ There is another filter mesh for hopstrainers that were bought after 2020/01/01 (item no.: 1041).Technical details Material: Stainless Steel AISI304, 1.4301Usage Brewery Pharmaceutical industry Mechanical engineering Food industrySize details Mesh[mesh] Mesh[µm] Mesh[mm] 1001490,1491501120,112200740,074300490,049400370,037

DescriptionTri-Clamp hopstrainers allows the filtration and flavorization of any liquids. The welded tri-clamp connection allows a quick assembly or disassembly of the whole system and make it easy to use. There are two types to use this hopstrainer:➜ The use as a normal hopstrainer enables wort and other liquids to be filtered. For this purpose, the liquid to be filtered is fed into the strainer and then filtered through the stainless steel mesh. Depending on the mesh of the filter, the result is a clear liquid and a dirty hopstrainer, which can then be cleaned under the waterfaucet. (Diagram, top illustration) ➜ Used as a hop-rocket, the strainer can additionally flavor the finished beer. For this, the filter candle of the strainer is filled with pelles or hop leaves and then the young beer is passed through. The hops remain in the filter mesh and the beer gains additional taste due to the cold hop. This application is possible by transfer from one keg tot he other keg or for direct tapping. (Diagram, bottom illustration) ➜ In order to be able to use the full filter performance, the use of an additional filter mesh is required. By default, this hopstrainer is delivered with a filter mesh with a #150mesh. If you would also like a different filter mesh, you can purchase this separately (item no.: 1041)Technical details Material Body: Stainless Steel AISI304, 1.4301 Material filter candle: Stainless Steel AISI304, 1.4301 Gasket: silicon, transparent Flangeh: 50,5mm Diameter: 76,2mm Length: 311mm Hole Diameter filter candle: 2mm completely demountableUsage Brewery Pharmaceutical industry Mechanical engineering Food industryLiquids Wort und Beer Tea und kombucha Ice creamFlow directionBottom connection is the inlet (filtering)Top connection is the inlet (hoprocket)Attention The use of this hopstrainer in a pumped system is not recommended. The pressure can tear the filter-mesh. For pumped use we recommend the strainer with side connection (item no .: 1035) and for industrial / commercial use our hop strainer with wedge wire (item no .: 1034).